폴리스티렌 폼 핫멜팅 스티로폼 고밀도화 EPS 용융 재활용 기계

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine is a Styrofoam EPS recycling machine, which can smash the waste Styrofoam materials into small pieces by the blades and screw, 그런 다음 다음과 같은 비율로 단단한 발포 주괴로 쉽게 압축할 수 있습니다. 90:1. 압축 후, 폐 스티로폼은 다른 제품을 만드는 데 재사용할 수 있습니다., 프레임 제품 및 건축 몰딩과 같은.

게다가, 적용 가능한 재료에는 XPS도 포함됩니다., EPP, 음식 쟁반과 컵. Wedo EPS recycling machine is able to eliminate all your waste foam recycling concerns.

폴리스티렌 폼 핫멜팅 스티로폼 고밀도화 EPS 용융 재활용 기계

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine is a Styrofoam EPS recycling machine, which can smash the waste Styrofoam materials into small pieces by the blades and screw, 그런 다음 다음과 같은 비율로 단단한 발포 주괴로 쉽게 압축할 수 있습니다. 90:1. 압축 후, 폐 스티로폼은 다른 제품을 만드는 데 재사용할 수 있습니다., 프레임 제품 및 건축 몰딩과 같은.

게다가, 적용 가능한 재료에는 XPS도 포함됩니다., EPP, 음식 쟁반과 컵. Wedo EPS recycling machine is able to eliminate all your waste foam recycling concerns.

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine to reduce the size of expanded polystyrene foam and expanded polypropylene foam for easier transportation. It is also called EPS densifier and EPS compactor. 그것은 해산물 가공 공장에서 널리 사용됩니다., 전자 공장, 백색 가전 및 흑색 가전 매장, 그리고 슈퍼마켓.

 

Description of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine:

1.Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by blades on the twin shaft, then through the screen conveyed into the barrel of the main machine.

2.The screw of the main machine can convey and heat the EPS material to melting state, then extruding them and hydraulic blade cut them to pieces for easy storage and transportation.

3.The shapes of the products can be designed according to customersrequirements.

 

Photos of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

2 overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

back of overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

screw heater of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

EPS from Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

melt EPS from Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Principle of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine:

The twin shaft are two parallel shafts with blades, they running in different rotation direction. Each shaft has blades and driven by the gear box, to crushing the EPS material then the material will get throught the sreen into the barrel. The material will be processed by the high speed rotary screw to the heating barrel. Then EPS material will be melt under high temperature and can extruding to expected shapes.

 

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine for the environment:

1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.

2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.

3.Although EPS is derived from a non-renewable resouce – 기름, it represents less than 0.1% of crude oil usage.

4.As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.

 

Data of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

model H-200
Screw diameter Φ250 mm
Pitch length 180 mm
Screw speed 160 r/min
Yield 200kg/h
Filter aperture 50 mm
Extruder center height 366 mm
main motor power 22KW
Heating rate The total area of the three districts is 14KW.
Crusher motor power 2.2kwx4
Number of crusher blades Four axes 11 +10 +11 +10
Crusher speed 100r/m
Machine size 3400×1880×2550
Machine weight 1800 Kg